TR-1 Gladiator Technical/Specifications

SPECIFICATIONS
Pump Set	10.5" L x 4.5" W x 3.75" D
ECU	6.5" H x 7" W x 2" D
Compass Ball	3.6" Dia	Cable length 18' extendable
HH/Remote	5" x 2.5" x 1"	Cable length 18' extendable
Deckmount	5/8" x 2"	Cable length 9' extendable
Battery Cable		Cable length 8'
Warning Horn		Wire length 9'
Tach Cable		Cable Length 13'
Supply Voltage	11.5-14.0	VDC
Inline Fuse		ATO 40 Amp
Interface	NMEA (0183) 2 inputs, 1 output	APHDG10 GHZ
Operating Ambient Temperature		20-120 deg. F

TR-1 GLADIATOR TECHNICAL INFORMATION

TR-1 GLADIATOR COMPONENTS

Electronic Control Unit

Water resistant Electronic Control Unit (ECU), is simple to mount and uses gold plated pico connectors for water tight connections. ECU is filled with a Urethane potting compound to protect sensitive electronics from salt water incursion.

Compass Ball

Fluxgate Compass with Gyro is standard equipment with the TR-1 Gladiator. The Compass Ball installs easily with versatile mounting bracket. Mounts out of the way in the front 1/3 to 1/2 of the boat at least 24" from any magnetic interference.

System is capable of Multiple handheld's. (Needs a splitter box.) Allowing for a handheld to be located at every station. Handheld is extendable using the easy to connect TR-1 Extensions. Extensions are available in 2 lengths, 9' & 30'.

Handheld Remote

Highly efficient piston pump with a 12 volt motor and shut off valves.

Pump unit

Optional Wireless Remote

Wireless remote gives you the freedom from the wired remote for easy steering commands.